| ■ Products > Thermal plastic welding machine |
| Thermal plastic welding machine (PVC welding machine) |
|
 |
 |
|
| ■ Advantages |
- Suitable for PVC, PP, PE, ABS, etc (Various Industrial Use)
- Since our blower adopted electric diaphragm blower, its discharging structure is simple, and durability of bobbin(heater) is long since it
always blows fresh air to the inside of heater gun owing to no need of axis receiver, rotary van. With simplifying supplies, it shows lower
defects, high durability against long term operation, and less noise owing to no oil supply.
|
|
| ■ Welding method |
|
|
 |
- Make the angle of tip sharp by cutting the dotted lineas as it shown in
(FIG 1) with heating the tip of welding ROD B
|
|
|
 |
- As it shown in (FIG 1) operate HEATER GUN nozzle C to 1→2→3→4 directions with
heating ROD B and parent material A. press with road(FIG 2) t o downward direction
|
|
|
| ■ Specifications |
|
| Model |
KSU-W80-HOT-JET |
| Voltage |
AC 220V |
| Max Output |
700W |
| Heat Pipe |
400℃ |
| Pump |
SOL-PUMP |
| Wind Pressure |
0.1kg/㎠ (80ℓ/min) |
| Noise |
45-55db |
| Net Weight |
9.7kg |
| Dimension |
280(L)×220(W)×200(H)mm |
|
|
| ■ Features |
|
 |
|
 |
| The first domestic SOL-Pump style welding machine maintaining air flow constantly without causing a pulsating phenomenon and reducing defective rate during welding. |
|
|
|
